Tips for the operation of the block clamp forklift
1.Understanding of the missing vehicle: Including handbrake, clutch, throttle, brake, gear, lift lever, tilt lever. The handbrake is when the car is stopped and must be pulled down, the clutch is to start the shift slowly when moving forward and backward, the cooperation of the accelerator is very important, and it is appropriate to control it. The brake is an important part of vehicle braking. Distinguishing, lifting rods and tilting rods must be used in conjunction with forklift operations.
2.Starting of the vehicle: It seems simple to start the vehicle. It is actually very important. Release the handbrake to raise the fork, step on the clutch to engage the forward or reverse gear and fast or slow gear. And the spacing is small
3.Clamping bricks: When the vehicle drives to the front of the building bricks, step on the clutch, place the forward gear in neutral, then release the clutch, control the lift lever to rise and fall to a suitable position, and then step on the clutch gear forward gear and gently release the clutch before the vehicle slows down Adjust and insert the middle part of the bottom of the cargo with the lifting rod, step on the clutch and hang the neutral gear to control the tilt rod to tilt upward to a suitable height, and step on the clutch and hang the reverse gear to run smoothly.
4.Put down: the vehicle drives to the designated position of the cargo, step on the slow clutch to move forward and then step on the brake to stop, put the gear to neutral and slowly lower the fork control tilt lever to level, step on the clutch to hang back.
5.Parking: Drive to the parking position, step on the clutch gear neutral, put the fork to the end, pull up the handbrake, turn off the forklift
☎ + (86) 18659803696
✉ sales@unikmachinery.com
✓ www.unikblockmachine.com