UNIK, as a manufacturer of block machine, now teaches you four basic steps to ensure the normal production of the equipment.
Step 1: do a good job of testing the equipment before starting the machine. The main thing is that the mold must be kept clean, the imprisoned link of the equipment must be locked, and whether the oil pipe is leaking.
Step 2: Turn on the cooler more seasonally. Turn on the cooler before turning it on in summer. In winter, it is half an hour after the machine is empty. When the oil temperature of the equipment exceeds 45 degrees, turn on the cooler again.
Step 3: Check the equipment after shutdown. Check whether the key moving parts such as the mold, bearing, screw and so on of the brick machine are normal.
Step 4: Clean up molds, material trucks, machines, etc. after shutting down every day. The running parts of the equipment need a proper amount of lubricating oil, and the spilled oil should be properly cleaned to prevent dust from damaging the machine parts.
The main raw materials used in the production of concrete products are abundant and cheap waste residue resources in various regions, such as waste construction waste, river sand, stone powder, sand, fly ash, slag, slag sand, gravel, coal gangue, ceramsite, perlite Add a certain amount of cement to one or two or three of a variety of industrial wastes.Therefore, the unit cost is lower than that of clay bricks, coupled with its environmental protection, energy saving, and high strength. The products are widely used in construction, roads, squares, hydraulics, gardens, etc.