Pay attention to the following points when using cement hollow brick machine:
1. The storage hopper of the cement brick machine is easy to condense into blocks due to the cement board, so the materials should be used at any time, and it is not suitable to store for a long time. Pay attention to the loading and feeding, and there should be no large-size aggregates or other foreign objects in the mixing. Mixing, especially iron and other sturdy objects, can easily damage the machine.
2. The bottom plate of the supply hopper should be kept consistent with the surface of the abrasive tool. After a certain period of use, it should be checked and adjusted. After the supply hopper is returned, it can scrape back the remaining material and clean the surface of the pressure head. The upper and lower scrapers should be adjusted properly. Excessive wear should be removed and replaced in time; when the machine is tested for the first time, a manual pallet must be used to filter it. The length and thickness of the pallet are kept within plus or minus 2mm to prevent jamming and damage to the feeder.
3. The hydraulic system should be adjusted to the rated pressure, the oil filter screen should be cleaned regularly, the oil should be filtered at least once a year, the actual oil volume of the mailbox should be checked frequently, and if necessary, the alloy sleeve should be replaced; The clearance on the four sides of the head is roughly equal, and the demoulding is stable.
4. Check whether the brick connecting machine is clean. If there is any bonded material, it must be shoveled off before being sent to the bottom plate library of the forming machine; the vibration pressure time must be strictly controlled, and the amount of material can be adjusted if necessary. Pay attention to whether the limit of each process is at any time Normal, whether the screws are loose, if there is an accident, stop the machine and adjust in time.
5. When the cement brick machine is running, strictly prevent items on the pallet. If there is excess material on the pallet, it must be cleaned up in time, otherwise the mold frame is not in place. At this time, the mold frame and the feeding platform are not on the same plane. , It will damage the feeding trolley; when the cement brick machine is working, it is strictly forbidden for non-workers and objects to approach the equipment, otherwise it will cause casualties and damage to the machine.
☎ + (86) 18659803696
✉ sales@unikmachinery.com
✓ www.unikblockmachine.com