Concrete paver mold manfacturing process
1.check and review the steel mold processing accuracy of the cement brick machine mold;
2. finishing contour, punching contour and hole position, finishing process reference hole and height reference, finishing guide surface and guide hole;
3. Align the reference plane of the process reference hole, and check the margin of the insert;
4.fitter inlay technology;
5. Check and recheck the machining accuracy;
6. Semi-finishing contours, finishing various installation working surfaces of cement brick machine steel molds, semi-finishing various guiding surfaces and guiding holes, leaving margin for finishing process reference holes and height reference surfaces, and recording data ;
7. Before semi-finishing, align the side reference surface to ensure accuracy;
8. Rough machining of die steel mold contour, non-installation and non-working surface machining;
9. Align the casting billet with reference and check the margin of the contour;
10. Bottom layer processing, guaranteed processing volume.
The mold plays an important role in the working process of the cement block machine. When processing the mold, you must know the process flow chart of mold processing, select the materials required for mold processing, and choose the appropriate mold processing method, so that the mold produced can be Better meet the production requirements of concrete products.
☎ + (86) 18659803696
✉ sales@unikmachinery.com
✓ www.unikblockmachine.com