As one of the important equipment supporting the country's infrastructure construction, the cement pipe making machine is very competitive. You may be a little unfamiliar with the underground water pipeline of the cement pipe making machine. The following factors need to be considered in the design of drain pipe for concrete pipe making machines.
The size of concrete pipes depend on whether it is a sewage pipe or a rainwater pipe, a pressure pipe or an artesian pipe.
1.For rainwater pipes, you have to consider the area of the water collection area, how much soil absorbs, and what is the average annual precipitation to determine the flow of rainwater.
2. For sewage pipes, you have to consider the number of industrial and mining enterprises, and cement pipe machine residents in the water collection area, and what is the total annual drainage volume to determine the sewage flow.
3. The service life of rainwater pipes should also be considered. If it is ten years, one must look at the amount of precipitation in the previous ten years to determine the flow. According to the flow rate and the time it takes to discharge the water, the flow rate is measured and the design pipe diameter is calculated. Generally, the actual pipe diameter is 3/2 of the design pipe diameter. Pressure pipes are generally used in rainwater and are rarely used.
At the same time, the buried depth design of the pipeline should consider the thickness of the overlying soil on the pipeline, whether there are structures with heavy loads on the ground, traffic flow, and the thickness of the local frozen soil layer. If the pipe is a flat-mouth pipe, the mouth of the pipe shall be connected by means of mortar wiper tape as an official hoop. If the cement pipe making machine uses socket pipes, use rubber rings for connection. if you require more information, please feel free to contact us.
☎ + (86) 18659803696
✉ sales@unikmachinery.com
✓ www.unikblockmachine.com