In fact, the most troublesome of the user who buys the hydraulic brick machine to do the brick business the most troublesome is the damage of the brick machine mold is frequently changed. how to make block making mould use for a long time? Today, Unik Machinery Cement Brick Equipment Factory will talk about this issue with you.
We all know that the block making mold is the core of the hollow brick machine, and it is also a component that is easy to damage. It is also very difficult to replace it. The hardness and wear resistance of the mold are the most important points. So how do we increase the mold life of the hollow brick machine? First, Adding a cushioning device is a spring, and the spring is added at the four corners of the mold to avoid hard and hard wear. Secondly, the mold should be subjected to micro-powder borocarburizing surface strengthening and quenching heat treatment to obtain better toughness and hardness, and improve its own performance, so that the service life of the mold will double. There is also the choice of raw materials for the mold. The molds we used have just been processed with 65# manganese steel, which has a relatively high wear resistance and a relatively high hardness. Of course, the added cost has increased accordingly. In terms of pressure, we changed the hydraulic system of the single-cylinder hollow cylinder to three-cylinder to avoid deformation of one point under long-term pressure and distribute the pressure evenly on the mold. This not only did not weaken the effect, but also greatly enhanced the shape of the brick pressure.
Please log in to our website: Cement Hollow Brick Machine www.unikblockmachine.com
Best Regards
Jonathan Yan (exported manager)
UNIK Machinery Limited
Mobile: (86)-18659803696
Whatsapp:+86-18659803696
Tel: (86)-595-28085862
Fax: (86)-595-28085861
E-mail: Jonathan@unikmachinery.com
Website: www.unikblockmachine.com