Paver interlock is made of slag, slag, fly ash, stone powder, sand, stone, cement, etc., scientific ratio, water mixing through high pressure by hollow block or paver interlock machine. This type of equipment is also called a non-combustion brick machine, that is to say, the produced cement brick or hollow block does not need to be sintered and can be shipped out after drying in a short time. It can be said that with less investment and quick results, it is a hot industry for many investors. when it is installed, you should inspect following items:
1. Check whether the cement brick machine is damaged or deformed during transportation (special attention to hydraulic lines).
2. Check if the fasteners of the main parts of the brick making machine are loose.
3. Check the gear unit. Whether the cylinder of the vibration table and each lubrication point are refueled as required, and the amount of oil is appropriate.
In addition, the cement brick machine should be thoroughly wiped. Prior to the test machine, the parts that slide relative to each moving part should be lubricated as specified. If the machine needs to be disassembled due to transportation, it can be divided into a molding device, a plate feeding device, a feeding device, a brick arranging device, a palletizing device, an electric control device, etc., and assembled into a position according to an assembly relationship.
