The block making machine is a machine that adds a small amount of cement to produce new wall material blocks from fly ash, river sand, stones, stone powder, fly ash, waste ceramsite slag, smelting slag and other materials. The new wall materials are mainly blocks and cement bricks, most of which are formed by hydraulic molding, and some are formed by vibration. The block making machine is silent and static pressure mode. No noise, high output, high density, no need for pallet maintenance, short maintenance cycle, less employment, no requirement for working ground, and a wide range of products. The fabric conveying mechanism needs to be used in the block forming process. The existing fabric conveying mechanism has poor adaptability and poor buffering effect. Therefore, a fabric feeding device for a new block forming machine is proposed.
The beneficial effects are as follows: the height of the face mix trolley can be adjusted through the set movable frame, which can be adapted to block forming machines of different heights, and has good adaptability. At the same time, the set buffer component and the crank have better buffer effect, and combined with the set track The components and hydraulic cylinders can realize the lateral adjustment of the face mix trolley, which is convenient for the supply of face color