Hydraulic ducts of Block Bricks Making Machineprovided by UNIK MACHINERY are able to bear the weight of the hydraulic oil, as well as the pressure, required to ensure the normal production of the machine. These hydraulic ducts are produced by a famous manufacturer. Long operating life is ensured. Normally, it’s better to have spare hydraulic ducts provided by UNIK. If other types of hydraulic ducts have to be considered as spares, note the following instructions:
◆The design performance of the ducts must be able to bear the weight of hydraulic oil;
◆The working pressure of the spares should be the same as or exceed that of the hydraulic tubes;
◆The inner-diameter of the spares should be the same as or exceed that of the hydraulic tubes, unless the inner-diameter of the original hydraulic ducts is not the same.
No. | Components | Frequency | Regulations | Lubricant |
1 | Blending machine body (arms/blades/axis) | Daily | Cleaning and lubricated | A |
2 | Transmitting belt | Daily | Tension check | - |
3 | Axis bearing; | Daily | Add grease | B |
4 | Axis seal | Daily | Add grease | B |
5 | Helical blade | Every week | Status check and check of the gap with the shell body | - |
6 | Back block of the shell body | Every month | Status check | - |
9 | Hydraulic motor | Six months | Add grease | D |