According to various reactions of customers, it can be found that most of our customers do not operate machinery and equipment according to our operation guidelines and operating procedures, which is inevitably prone to failures, and even safety accidents occur, resulting in personal safety of personnel. Therefore, I will briefly introduce the problems that should be paid attention to in the process of operating the cement brick machine.
1. The equipment is often produced day and night in the factory, which will inevitably cause certain damage to the machinery and equipment. Therefore, we need to carry out regular maintenance on it to ensure the normal and good operation of the machinery and equipment. During inspection and maintenance, the hopper must be fixed first, and the power must be turned off.
2. When the block making machine is working, it is not allowed to put the tools in use into the drum, otherwise a safety accident will occur.
3. When we use the mixer, we must place the mixer in a relatively solid position, and we must add some brackets or support cylinders to stabilize the mixer, and can not use tires for support.
4. Before we turn on the block machine, we must check whether the clutch, brake, wire rope, etc. should be in good condition, and the drum should not have waste, slag, etc.
5. Be sure to pay special attention when the feeding hopper is raised. During this period, no one can be under the hopper. After the work is completed, you must remember to firmly fix the hopper of the brick making machine.
☎ + (86) 18659803696
✉ sales@unikmachinery.com
✓ www.unikblockmachine.com