As a medium-sized hydraulic brick press machine, the power consumption of the static brick machine is quite amazing. Many manufacturers try to ensure the function of this hydraulic brick machine and the integrity of the equipment, save energy and energy as much as possible, and reduce working costs. Then, if you want the hydraulic brick machine to save energy and electricity, from the following content, Huding Machinery will share some upgrade operations with you to make the static brick machine energy-saving and power-saving.
The power consumption of hydraulic oil pumps accounts for more than 97% of the total power consumption of hydraulic presses, so reducing power consumption is the key to energy saving of hydraulic presses. When the hydraulic press is in rapid deceleration, deceleration, pressure retention, pressure relief return, piston ejection, piston retraction, buffer cylinder ejection, etc., the required pressure and flow will change. When the oil demand of the hydraulic pump changes, the safety valve at the outlet of the oil pump adjusts the load and flow, while the output power of the motor does not change, thus wasting energy.
The frequency conversion speed regulation device is composed of a rectifier circuit, a filter circuit, an inverter circuit and a control circuit. Its function is to invert alternating current through an inverter, convert it into direct current, and then convert it into alternating current output of different frequencies through inverter conversion. To the motor. This allows the hydraulic pump motor to work under different simulations.
If the temperature is too high and the temperature rises, the deviation will affect the normal operation of the system. The cause should be analyzed and measures should be taken to solve the problem. The detection force, speed and stroke of the hydraulic brick machine are adjustable, and the operation reliability is high. If problems are found, they should be reorganized.
For the hydraulic system of the hydraulic brick machine system, the working parameters of each working cycle and the various actions that make up the cycle, such as force, speed, acceleration, the starting and ending points of the stroke, the time of each action, and the total adjustment of the entire cycle Time and so on. The correct value can provide the system with a correct and reliable duty cycle.
☎ + (86) 18659803696
✉ sales@unikmachinery.com
✓ www.unikblockmachine.com