The concrete mixing station weighing system software is part of the concrete mixing station, the key has ice, cement, and additive, coal ash, sand stone weigh, then this weighing is in work What is the main use, the advantages?
Today's hybrid mixer equipment metering system software is generally two ways to measure;
One is measured according to the volume of the raw material, and there is also one is measured according to the quality of the raw material. Metering system software can also be divided into human manual metering system software and electronic computer automatic metering system software, and when manual manual measurement, everyone's labor efficiency is large, and the measurement is not as accurate, but the project cost It will be much cheaper relatively.
The intensity system software of the concrete mixing station includes a metering device, a froth and a scheduling, and the metering device is provided on the shelf, and the bucket is set on the weighing device, and the following:
1.The body feed gate valve is located at the bottom of the fight, but also built into the mutual discharge bin, discharged on the sound card rack, different types of gestures, the sand, cement, and coal ash There are formulation regulations, only the amount of formulation is required to ensure the quality of the mixed soil, the cement metering is mixed with the machine to carry out the cement to cement.
The cement meter is made up of the dough body and the backup door, and the three sensors are hanging on the sound card rack. The bodies are welded by forming a good floor, and the refolder door uses butterfly valve, the sealing property is good, and the butterfly valve is opened and closed by the cylinder. Cement is immediately sent to the metrics according to the spiral transporter, and it is measured to be equipped with the preparation of the hyperi.
2. Weighing device weighing device is installed on the upper side of the spending of the mounting fulcrum in the fidelity, the metering device is set to the fight, and each metering fight must use three sensors. , Select the installation site contour and contour line when installing multiple sensors, sitting in the lower side of the fulcrum, and placed more stable.
The cement is supplied by a spiral transporter, the spiral transporter is connected in the middle of the silo, and the metering entrance and exit and the mixer cover are also connected with the white canvas case. The metering bucket is set up with the tanker and the tanker interoperability, and do the actual effect. In the case of delivery, the sensor should be removed, replaced with hooks to avoid the destruction of the sensor while transporting.
Some concrete mixing plants must also use coal ash, and the coal ash is the same as the structural form and principle of cement weighing.
☎ + (86) 18659803696
✉ sales@unikmachinery.com
✓ www.unikblockmachine.com