The concrete block forming machine relies on hydraulic force, pressing and forming, the selection and use of the hydraulic oil of the main engine are all worthy of attention, and the hydraulic oil directly affects the life of the main engine.
Hydraulic oil is divided into three series according to the different machines used. Generally, the hydraulic oil used in the cement block forming machine is determined according to the operating temperature of the machine. When the temperature is high, a high-grade hydraulic oil is selected, and a low-grade hydraulic oil is selected when the temperature is low. , Low-grade hydraulic oil has low freezing point and good viscosity-temperature performance, suitable for use in winter and summer in cold regions.
Correct use of hydraulic oil can effectively protect the equipment of the block making machine. Hydraulic oil is also a liquid that easily pollutes the environment and is polluted, so be vigilant when using it. First of all, different brands and different types of hydraulic oil cannot be mixed. If you need to replace the original hydraulic oil, all the original hydraulic oil can be drained and cleaned up, and it can be used after dehydration,suspended solids, and various magazines enter; the fuel tank and the various pipes of the system should be connected reliably and well sealed to prevent leakage and cause environmental pollution and waste; avoid using hydraulic oil at high temperatures, which will accelerate oil oxidation and affect normal use; long-term storage,To ensure the quality of the hydraulic oil before use, it can be filtered with a precision filter element to ensure that the hydraulic oil is not contaminated; regularly check the hydraulic oil of the block moulding machine to ensure the overall safety.
☎ + (86) 18659803696
✉ sales@unikmachinery.com
✓ www.unikblockmachine.com