As the weather gradually gets colder, the operating efficiency of the cement block machine is not as good as before. That is because the decrease in temperature leads to the weakening of the performance of the cement block machine. At the same time, the oil in the vibration box of the cement block machine should also be changed! After entering the winter, the weather is getting cold day by day, and many concrete block factories have stopped production, especially in the northeast of minus 20 degrees, but our central and southern regions have just cooled down, and the brick factories are still operating normally. Here, a reminder to the owner of the brick factory who is producing bricks: the weather is getting colder, if you want to continue production, replace the oil in the vibration box of the non-burning brick machine with new oil!
High temperature, extreme cold and dusty environments are easy to speed up the deterioration of the oil. Under normal circumstances, it is recommended to replace it every three months. Usually, the oil in the shock box is used to volatilize, and the oil should be continuously added to the shock box. Three Change it about once a month, put the cleaned oil in a container that can hold it, and it can be used to lubricate the machine parts in peacetime to promote better lubrication performance. Replacing the oil in the vibration box can reduce the viscosity of the oil and play a better lubricating effect. When changing the oil, first use diesel to clean the vibration box, and then replace with new oil, you can try to avoid this kind of phenomenon.
If the temperature is relatively cold, it will affect the normal operation of the cement block machine. Therefore, learning and mastering a variety of skills to use the cement block machine in winter can help the cement block machine to produce smoothly. If you want to know more, please feel free to contact us.
☎ + (86) 18659803696
✉ sales@unikmachinery.com
✓ www.unikblockmachine.com