For most users, the maintenance and maintenance of the cement hollow block machine in the later stage is very troublesome and cumbersome, but we still have to do this work, because only the later maintenance and maintenance of the cement hollow block machine can ensure the quality of the equipment and performance, one of the more important components, the bearing, needs to be disassembled and replaced on a regular basis. However, there are strict operating specifications during the disassembly process. If the disassembly is wrong, it may not be able to achieve the effect of maintenance and maintenance. On the contrary, it may lead to premature damage to the bearing, so today I will specifically explain to you how to disassemble the bearing of the cement hollow brick machine.
First of all, when disassembling and washing, we should screw some outer ring extrusion screws around the shell, and then slowly tighten these screws, and slowly disassemble this will help us to slowly remove the outer ring. Bearings that protect the outer shell can be disassembled by a press or a slow necrotic knock for some reasons, and a press can also be used in the disassembled inner ring, but one fact we need to pay attention to is that even if the bearing is The inner ring is uniformly stressed, and if you are not careful, it will still lead to damage. In addition, because the cement hollow brick machine manufacturers are different, the bearings installed inside will also be different, and the disassembly and installation are also different. It is recommended We carry out disassembly and safety work under the guidance of the technical staff of the cement hollow brick machine manufacturer.
☎ + (86) 18659803696
✉ sales@unikmachinery.com
✓ www.unikblockmachine.com