More and more cement brick machines have been put on the market and have been favored by many people. So how should the cement brick machine mold be maintained?
Maintenance of cement brick machine mold:
1. First, clean up the raw materials, oil and rust on block mold.
2. Conditionally spray the rust-proof paint as carefully as possible to prevent rust marks caused by long-term storage and moisture in the air.
3. If there is no condition, apply oil to the weld and then try to prevent it from being stored in a ventilated and dry place.
4. For the mold of the hollow cement brick machine, not only spraying, but also the punch of the upper mold, because that core is the easiest place to open the welding, we need to carry out a detailed inspection, and then make a repair welding.
5. The springs at the four corners of the mold must also be properly stored, because the springs corresponding to each mold are different and must be the same height.
6. Keep the upper and lower molds as separate as possible. Do not put them together. This will cause air circulation and rust.
Well, the above is our hydraulic brick machine mold preservation rules, strictly follow the steps to extend the service life of the block mould.
