Five steps to improve effiiciency of the hollow block machine parts,. Hollow brick machine is widely used in our real life. How to maintain this problem as a hollow brick machine for environmental protection brick machine, the machine teaches you five ways to maintain the method, so that your brick machine lasts longer.
1. Install or replace new and old molds, be sure to avoid collision, bump, civilized assembly, pay attention to protect the mold;
2. Frequently check the size of the mold and the condition of the welded joints during use. Cracks in the welds should be repaired in time. If the wear is too fast, the aggregate size should be adjusted. If the wear is excessive, the quality of the product needs to be matched with a new mold.
3. Carefully adjust the gap, including pressure. The head and the core, the indenter and the moving plane of the skip, the frame and the line are spaced apart, and the relative movement shall not interfere or rub;
4. When cleaning the mold daily, use air compressor and soft tool to remove concrete residue. It is forbidden to hit and scratch the mold with gravity.
5. Replace the mold, clean, oil and rust-proof, should be placed in a dry, flat place with a flat pad to prevent gravity deformation.
If you wish to contact Unik machinery ltd and learn more about how we can help you benefit from our services or to discuss any staffing needs, you can reach us at sales@unikmachinery.com

