The maintenance of cement brick machine equipment plays a vital role in the long-term stability and normal operation of the equipment. In the maintenance of cement brick machine equipment, the cleaning of the hydraulic system is an indispensable step.
1. The cleanliness is generally determined by the particle counting method, and is expressed by cleaning the official operating status code to achieve a certain index.
2. During the cleaning of the cement brick machine, the operation of the hydraulic pump and the heating of the cleaning medium are performed at the same time, and the oil temperature is between 50 and 90°C.
3.The hydraulic system of cement brick machine equipment should be cleaned more than three times. After each cleaning, when the oil is hot, all the oil is released from the system. After cleaning, clean the filter, replace with a new filter, and add new oil.
4.When cleaning the oil pipeline, it is recommended to install a filter or filter screen, which can effectively filter out the magazine and achieve a good cleaning effect.
5. Use large flow rates to remove impurities from the system whenever possible.
6. In the process of cleaning the hydraulic pump, it is more beneficial to improve the intermittent operation of the hydraulic pump, so that the cleaning effect is more obvious, otherwise it will not be cleaned.
7.Pay attention to the maintenance of hydraulic components, or replace hydraulic components in time.
Doing a good job in maintaining cement brick machine equipment is beneficial to the enterprise, which can not only extend the service life of the equipment, but also reduce the cost of the enterprise, and at the same time make the enterprise efficient and stable production to maximize the benefits.
☎ + (86) 18659803696
✉ sales@unikmachinery.com
✓ www.unikblockmachine.com