vertical rcc pipe making machine
Products Description
The working principle of the vertical RCC squeezing pipe making machine is: using the rotation movement of the main axis of the pipe machine to squeeze the dry hard concrete by squeezing the head to produce cement concrete tubes and steel concrete pipes in a axial forming. The main axis drives the squeezing head into the tube mold to perform rotation movements, throw the dry hard concrete into the inner wall of the pipe mold. Under the two -way squeezing of the squeezing head, the concrete is compacted, wiped out, and the tube wall is enhanced with the main axis. The production of this machine takes the φ600 tube as an example. It can produce about 13-15 roots per hour, which is equivalent to the peaceful capabilities of 3 focus or 3 suspension rollers. The requirements of the specifications of the cement pipe are undoubtedly very efficient. The use of dry hard cement concrete can be removed immediately. Therefore, it has a small pipe model and can save a lot of thermal energy and water. Nature can also be used under high temperature conditions. Maintenance method produces cement pipes.
Technical advantages
1. The operation is simple and convenient, electro-hydraulic control is selected, and the operation control panel can be operated to complete various mechanical actions.
2. Reliable transmission, electrical appliances, hydraulic pressure and various driving organizations can put the transmission in place, so that the entire pipe-making operation procedure can be completed smoothly.
3. The mechanical noise is low. After testing by the testing part, the maximum noise during mechanical operation is below 75 decibels, which is lower than the noise produced by the centrifuge.
4. High production efficiency and low labor intensity. During the production of any diameter pipe of Φ300-1200, one can be completed in only 2-5 minutes. All demoulding methods are adopted, and the assembly and disassembly of molds are simple, which reduces the labor intensity of workers.
Main components
The Mechanical equipment of the pipe making machine is the most important structure of the entire pipe making system. It is mainly composed of a machine body, a power reduction box, a feeding mechanism, a feeding grinding device, a mold change turntable, a socket forming mechanism, a mold and accessories.
Main Machine Components:
1. Mechanical system
Mainframe, feeding system, power head system,
Socket mechanism, mold and accessories composition
2. Pneumatic system
Pneumatic pipeline, positioning cylinder
3. Hydraulic system
Double hydraulic station, hydraulic cylinder,
Hydraulic valve, cooling water tank
4. Electrical system
Main power frequency conversion box, PLC frequency conversion control box, touch screen control box.
Mould removed
The protection of the protection of radial extrusion tube machine equipment is to carefully protect the equipment. After manufacturing cement pipes, do not open the mold, and place the cement pipe mold and cement pipe on the open air for natural protection. Generally speaking, the cement pipe takes 1 day for open -air protection, and the mold can be opened on the second day.
After arriving, open the mold for time care and maintenance. Special persons need to be sprayed three times a day, usually in the morning, noon, and afternoon. The purpose of water spray is to adhere to the humidity of the cement pipe, and gradually condense the concrete, and increase and reduce the number of water spraying according to the climate conditions and climate humidity.
Our factory
Manufacturing
Delivery
workshop
Process
The vertical radial squeezing pipe machine involves the field of concrete pipeline manufacturing technology. The rack and the guide column are vertically fixed, the slider is connected to the guide column, the power head rotation drive is fixed with the slider, and the lower end of the dynamic head rotation drive is fixed with the vertical shaft to the forming head. The lifting mechanism is connected to the rack; the rack below the slider is equipped with a workbench, a vertical pores on the workbench, a chassis in the hole, connecting the rotor in the center of the chassis, the rotating mechanism on the other end of the rotating shaft, and the rotating shaft Support on the bracket, there is a lifting mechanism with vertical settings between the bracket and the rack; there is a bucket on the outside of the rotating shaft between the slider and the molding head. It can be said that the overall structure is simple and reasonable, the processing operation is very convenient, and it can overcome the lack of existing technology.
- Design your equipment based on your exact requirements and specifications
- Ensure all our machines are not only able but also capable to delivery reliability and productivity to maximize our customer's profit.
- At least 15 years experienced engineer are available to support
- Large stock of spare parts.
- Quick and efficient customer service:remote maintenance, hotline support,assistance subscriptions
- We become your partner throughout the life of the machine.
For those times when the machine needs servicing or repair, trained technicians can be dispatched to the site to solve the problem. These technicians are equipped with the necessary tools and knowledge to identify and repair any issues with the machine. This ensures that the block making equipment runs smoothly and efficiently, reducing downtime and increasing productivity.
Hot Tags: vertical rcc pipe making machine, China, manufacturers, suppliers, factory, wholesale, customized, buy, price, quotation, price list, for sale, made in China, Brick Making Machine Malaysia, Concrete Block Making Machine Uganda, Cement Sand Brick Making Machine, Interlocking Concrete Brick Making Machine, Concrete Block Machine China, Steel Concrete Mold
