High Quality Block Bricks Making Machine

high quality block bricks making machine
 

Checking Configuration: The "DNA" of a Machine Is Written in Its Specification Sheet

The long‑term performance of a block forming machine depends on the brands of its core components. This is not marketing rhetoric – it is a fact repeatedly validated in the industry.

Control system – Equipment using Siemens or Mitsubishi industrial‑grade PLCs supports fault self‑diagnosis, remote diagnostics, and recipe storage. When a problem arises, you don't need to wait for an engineer to arrive – the system can tell you exactly where the fault is.

Hydraulic system – Approximately 80% of block machine failures originate from the hydraulic system. Equipment using Rexroth or Yuken hydraulic components has a significantly lower failure rate than domestic brands. This is not about "better" – it is about "more reliable."

Vibration motors – A block forming machine undergoes tens of thousands of high‑frequency vibrations every day. Whether the motor can withstand these conditions directly determines whether the equipment can run continuously. The reputation of Siemens motors in the industry is not built on nothing.

Frame steel – Frames welded from ordinary steel will gradually deform after two or three years of use, leading to faster mold wear and increasing dimensional deviations in the blocks. The cost difference of high‑strength steel frames is not visible at the time of purchase – it only begins to show in the third year.

Products	Pic	Size	Capacity	Cycle time	Daily capacity
Hollow block		390 ×190 ×190mm	5pcs/pallet	15-20s	7200pcs
Hollow brick		240 ×115 ×90mm	16pcs/pallet	15-20s	23040pcs
Brick		240 ×115 ×53mm	34pcs/pallet	15-20s	48960pcs
Paver		200 ×100 ×60mm	20pcs/pallet	15-20s	28800 pcs

 

Manufacturing

Delivery

workshop

Process

Checking Factory Testing: Has the Equipment Really Been Taken Seriously?

The inspection procedures performed before a machine leaves the factory directly reflect the manufacturer's attitude toward quality.

Has a load test been performed? Equipment that has not been load‑tested runs for the first time at your plant. Equipment that has been load‑tested has already run continuously with raw materials similar to yours before shipment, confirming that everything is in order before it is dispatched.

Have critical welds been inspected? The quality of welds on the frame cannot be judged by the naked eye. If a manufacturer performs non‑destructive testing, it at least shows that they care about weld quality.

Is a factory inspection report provided? Configuration lists, test data, and the brands and models of key components – all of these should be documented and traceable.

Contact now

Hot Tags: high quality block bricks making machine, China, manufacturers, suppliers, factory, wholesale, customized, buy, price, quotation, price list, for sale, made in China