QT3-15 Type ECO Hydraulic Building Block Making Machine
For a new concrete products manufacturer, considering the cost and limited capacity customer requires, we have designed smallest QT3-15 type ECO hydraulic block making machine, which are best choice for someone who has limited budget, limited space and the desire to achieve good quality blocks with the minimum cash outlay. the skeleton of the block making machine is adopted high intensity steel and special craft for welding, It can achieve the most reasonable operation speed,the most accurate deceleration and orientation.
| Main Features： |
Lowest maintenance cost and easiest operation |
|
|
Simple horizontal secondary material feeding, is combined both pressing and vibrating to ensure the high compactness and performance |
Specification:
Dimension | 5130×3860×2520 mm |
Pallet Size | 700×540×20mm |
Vibration Frequency | 3800-4500 r/min |
Hydraulic Pressure | 25 mpa |
Vibration Force | 68 KN |
Cycle time | 15-20s |
Power | 18.45 kW |
Weight | 5500 KG |
Capacity
Product size (mm) | Pcs./Pallet | Pcs./Hour |
390*190*190 | 3 | 540 |
390*140*190 | 4 | 720 |
200*100*60 | 10 | 1440 |
225*112.5*60 | 10 | 1440 |
The raw materials are crushed by a crusher, and the mixer is evenly stirred, and then the prepared materials are sent to the upper silo by the conveyor belt. The PLC controller operates to pour the material into the machine and shake it evenly. Then the hydraulic cylinder is output, and the upper and lower molds are pressed to form the brick body. The forming brick body is introduced, and the palletizing machine stacks the brick body code into a raft to carry out maintenance. The production line of the brick machine is controlled by the data control system, which is easy to operate, high in production efficiency and accurate in product specifications.
The hollow brick machine uses raw materials such as factory waste, fly ash and construction waste to replace the traditional brick machine production and use a large amount of land. Because hollow bricks protect precious land resources and also realize the reuse of resources, and the performance of hollow bricks is more in line with the performance of clay bricks, this is also the reason why the development of hollow brick market is promoted.
FAQ:
1.Which machine is most suitable for my project?
You should make sure how much work space you have to produce and store blocks, how many blocks you want to produce in a day, what your initial budget for this machine.
2.Can I use just one machine to make every type of blocks?
Yes,Our block making machine is designed to meet the mass production of various kinds of concrete masonry blocks like brick, blocks, pavers, slabs, curbs, interlocking types etc by just changing the mould. all you need to do is remove one type mould and replace with another, which cost at half hour for changing time.
3.what raw materials are required to produce blocks?
Cement, sand, aggregate Fine and coarse aggregates make up the bulk of a concrete mixture. The max diameter should require within 10mm.
4.Can I get installation for this machine?
We will arrange our engineer to your factory to guide installation and training,the customer will be responsible for all wages and expense of engineer.
5.How will you treat quality complaint?
A: First of all, all of our goods are strictly tested and inspected before delivery, which reduces the possibility of quality problem to near zero. If this is really a quality problem caused by us, we will definitely fix the problem, send you free goods for replacement or refund your loss.
