Automatic Concrete Brick Making Machine

Automatic Concrete Brick Making Machine
Details:
Automatic Concrete Brick Making Machine is an environment-friendly building material processing equipment. It uses waste materials, waste rock powder, waste slag, fly ash, waste ceramsite slag, smelting slag, and construction waste materials to produce unburned cement bricks, which plays the role of waste utilization. Standard bricks can be produced according to different production molds.
Send Inquiry
Chat Now
Download
Description
Technical Parameters

Automatic concrete brick making machine

 

Automatic Concrete Brick Making Machine is an environment-friendly building material processing equipment. It uses waste materials, waste rock powder, waste slag, fly ash, waste ceramsite slag, smelting slag, and construction waste materials to produce unburned cement bricks, which plays the role of waste utilization. Standard bricks can be produced according to different production molds.

The Automatic Concrete Brick Making Machine is a highly efficient and reliable machine that fully automates the brick-making process. With its advanced technology, it allows for smooth and continuous operation, increasing productivity and reducing labor costs.This revolutionary machine boasts many impressive features, including accurate mixing and molding, compact design, and easy operation. Its intelligent control system ensures precision every time, guaranteeing uniform size and shape of all bricks.

images of block making machine

Components in a block making plant

 

The cement brick automatic brick machine-made brick process needs to go through five steps, raw material selection, mixing, forming, demoulding, yard maintenance and other links. In the molding of products, it is inseparable from the regular operation of the staff. Only when the bricks are made correctly according to the process can qualified brick products be produced.

1.Raw material technical requirements:

Cement: Ordinary Portland cement 32.5Mpa is preferred, and the storage period of cement shall not exceed three months.  

Sand: Yellow sand with a fineness modulus of 2.0-2.5 should be used, and its mud content should not exceed 5%.

Aggregate: It should meet the requirements of GB/T14685, and it is advisable to use crushed stone with a maximum particle size of ¢0-6mm. The mud content shall not be greater than 1.5%, and the mud content shall not be greater than 0.7%.

2.Concrete mixer:

Mixing time: dry mixing should not be less than 1 minute, wet mixing should not be less than 2 minutes. , It should be slightly extended in winter. During the mixing process, water should be added as appropriate according to the moisture content of the sand. Before discharging, it should be checked whether the material meets the production requirements. It can be formed into a ball by hand, and it is better to disperse after loosening the hand. The humidity of the material in winter should be a little dry, and the humidity of the material in summer should be a little wet.

3.Pressurized vibration:

Pull the directional valve of the upper mold to drop naturally to the material level, then pressurize, adjust the pressure to 4MPa, press the vibration button, the vibration time should be adjusted to 3-5 seconds, adjust the vibration time according to the amount of material added and the performance of the mixture to ensure that the product Consistency in height and density. The hydraulic system is controlled at about 4MPa, and it is strictly forbidden to be too high.

4.Demolding:

After the vibration molding is finished, pull the handle of the drawer direction valve to the unloading position, pull the handle of the direction valve of the upper mold to the neutral position to lock the upper mold on the product, and then pull the handle of the direction valve of the drawer back to the neutral position. Pull the directional valve handle of the lower die to raise the lower die to an appropriate height (same as the height of the formed product), and then pull the directional valve of the upper die to raise the upper die to the highest point, and then the bricks are produced. When the finished product is pulled out, it should be checked whether there are slight missing corners, missing materials, cracks, etc. If there is any phenomenon, it can be manually repaired on site before it can be put into the storage yard.

5.Yard maintenance:

When stacking products, gently remove the bricks by hand and place them on the special iron plate, and clean up the sundries on the iron plate; when moving bricks, pay attention to the lower half of the product, and do not touch the surface of the bricks .

After the finished product is demoulded for 6 hours (4 hours in summer), the surface of the product should be watered for maintenance; normal watering will start 24 hours after it is put on the yard. Not less than 4 times a day in summer; not less than 2 times a day in winter. After a full week of watering, it can be cured naturally for 28 days before leaving the factory.

 

 

Specification of products(mm)

Number of blocks per pallet

Pieces/1 hour

Pieces/8hours

Block

Hollow block mould

400×200×200
 

7.5

1350

10800

Hollow Brick

block mould

240×115×90

20

4800

38400

Paving Brick

paver mould

225×112.5×60

20

4800

38400

Standard Brick

brick mould

240×115×53

40

9600

76800

Rectangular Paver

cement paver mould

200×100×60/80

27

6480

51840

Curbstone

curbstone mould

200*450*600

2

480

3,840

The machine can produce interlocking bricks, hollow blocks, solid blocks, and paving blocks, among other types of bricks. This feature enhances flexibility in construction projects, allowing builders to create diverse structures that meet the varied demands of the modern world.Productions based on machine's performance at 100%. Production data for guidance only, depending on the shape of the pieces, type of aggregates and possible circuit stops.

 

Our Global Clients

product-752-752

 

Our factory
hollow blocks machine for sale bulacan

Manufacturing

BLOCK MAKING MACHINE

Delivery

fully automatic hollow block making machine

workshop

BLOCK MACHINE PROCESS

Process

Our company has always adhered to the development direction of energy saving, emission reduction, recycling, and intelligent innovation, and has continuously launched high-end environmental protection building materials complete sets of equipment that meet the needs of social development, and continue to help the development of ecological environmental protection and solid waste resource recycling. So far, UNIK has successfully implemented more than 500 environmental protection block factores landing projects at home and abroad, and its product quality and technical standards have been obtained High praise from customers at home and abroad.


Our service:


Pre-sale service

◆ Accept consultation

◆ Confirm user investment target

◆ Site selection

◆ Design and construction plan, drawings


Sale service

◆ Assist in the supervision of the construction process

◆ Provide on-site guidance installation, commissioning equipment

◆ Help users establish on-site management system and quality management system

◆ Training production operators


After sales service

◆ Assist users in formulating production process recipes

◆ Provide network remote service

◆ Technician on-site maintenance

◆ Safe and fast parts distribution


Additional service:

◆Equipment mold update

◆Technical update, system upgrade

◆Product application technical support

◆Share the latest results

 

Hot Tags: automatic concrete brick making machine, China, manufacturers, suppliers, factory, wholesale, customized, buy, price, quotation, price list, for sale, made in China

Send Inquiry