To improve production efficiency, maintenance and management work is particularly important for interlocking brick making machine, here to introduce some tips:
1.You should check every parts of equipment to see if the fastening bolts are firmly fixed before usage; grease oil should be added where it is required, by following relative regulations.
2.Check if the controlling system is in good working state; the limit switches and the control components are out of work or not
3.Check the equipment and adjust the scraper position more often
4.Often check the self-insulation block production line of the hydraulic station to make sure if oil level is normal
5.Better to replace the hydraulic oil after size months and clean the tank
6.Hydraulic oil must be strictly filtered before use
7.Check the dimension of the bottom plates, and unqualified ones cannot be used to avoid damages done to the machines.
8.Daily check the electrical circuit, and take care the Electrical maintenance and precautions
9.Clear the residual concrete on the mold box, ram and other parts of the machine after each shift.