JS1500 concrete mixer
The JS1500 concrete mixer has a rated discharge capacity of 1500 liters each time. It is applicable to various industrial and civil construction projects such as prefabricated component factories, highways, bridges, water conservancy, ports, and docks. It can mix dry and hard concrete, plastic concrete, fluid concrete, lightweight aggregate concrete and various kinds of mortar.
1.Double-horizontal compulsory shaft
The compulsory concrete mixer can not only stir the dry hard concrete, but also can mix the light aggregate concrete, so that the concrete can achieve a strong mixing effect
The discharge door is installed at the bottom of the mixer and the discharge is started through the cylinder. As well as the open and close positions of the dischargers, the discharge doors can be sealed by adjusting the position of the seals.
3.long service life
Imported components are used, and the diameter of the mixing drum is less than half that of the vertical shaft with the same capacity. Therefore, the blade rotation speed is less than half of the vertical shaft type, so the blade and the liner wear little, and the service life is long.
The mixing system consists of a motor, a pulley, a speed reducer, an open gear, a stirring tube stirring device, an oil supply device, and the like. The electric motor is directly connected with the cycloidal speed reducer, and the two output shafts of the speed reducer are driven through the two pairs of open gears to rotate the two horizontally arranged stirring shafts in opposite directions at the same speed.
The loading system consists of a hoisting mechanism, a loading dragon frame, a hopper, and a feeding nozzle. The brake motor drives the reel to rotate through the reducer, and the wire rope climbs the hopper along the track of the loading rack via the pulley. When climbing to a preset height, a pair of rollers on the bucket door at the bottom of the hopper enter the water rail of the loading rack, and the bucket door automatically opens. Material is fed into the mixer through the feed nozzle.
The discharging system consists of discharge doors, air pumps, reversing valves, manifold valves, cylinders, and electrical devices. The discharge door is at the bottom of the mixer. The opening and closing positions of the pneumatic discharge and discharge doors are controlled by pneumatic cylinders, and the discharge door seal can be ensured by adjusting the position of the sealing strip. Discharging manual operation lever is used for emergency discharge and cylinder discharge when the power is cut off. It should be removed at ordinary times to prevent injury.
The electrical circuit of 1500 mixer has air switch, fuse, thermal relay, short circuit protection, overload protection function. Control buttons and air switch handles and indicators are on the distribution box door and are equipped with door locks. There is a protective cover on the button。
Input capacity (L)
Aggregate size (egg/broken) mm
Overall Dimension (mm)