Unik low cost cement brick making machine has advantages of good quality and excellent performance,so use it should pay attention to regulate the operation at the first test machine.
1.The first test machine, you must manually filter with pallet. Pallets length, thickness error is maintained at plus or minus 2mm, in order to prevent stuck pallet, and cause damage to pallet conveyor.
2.For the hopper floor to maintain the same plane with the mold, the use of a certain period of time should be checked and adjusted for feeding hopper back, both scraping back excess material, but also sweeping head surface sticky material, the scraper to adjust the upper and lower, excessive wear should be timely replacement.
3.Check the block machine is clean and found that the bond block, must shovel off before entering the molding machine . Vibration pressure time to be strictly controlled, if necessary, adjust the amount of material, always pay attention to the process limit is normal, the screw is loose, if there is an accident, should be promptly shut down to adjust.
4.Check the hollow cement brick power supply includes checking the electrical part of the ground wire to avoid leakage, short circuit and so on.
5.Hydraulic system should be adjusted to the rated pressure, regular cleaning oil filter, filter oil at least once a year, often on a regular basis to check the hydraulic system, so parts safety and product life extension effect.