When a new customer purchases our hollow block machine, he used to ask how to operate hollow block machine, here I would like to provide general introduction.
Firstly you should start the system on the industrial computer(PLC), set the parameters, turn on the oil pump and air pump to a certain pressure, the mode switch is selected as automatic, and the block type switch is selected as the land block mode. When the original point condition is satisfied, press the automatic start button and the raw material is forwarded. To the front position (the parameter can be modified during the forward process to adjust the opening time of the distributor, the pre-vibration time of the primer to make the material cloth more uniform), the front position stays after the end, and the raw material is after the line, if the number of feeding is set more than Once, the raw material is driven to the back time and then forward, and the next move is made. After the number of times is enough, raw material feeder will stop after the bottom, and the head will go down to the down time and then go up to the upper position and then stop. The middle platform is down, and vibration can be set to leave a certain space for the materials in the mold box to feed.if you require more information for operation, please email us firstname.lastname@example.org