Daily maintenance: 1. Before starting hydraulic block machine, inspect the components of the equipment to make sure the lubricating oil fill , and setting up the program. 2. Maintenance during running: use the machine strictly in accordance with the operating procedures. Observe the operation of the machine. If any abnormality is found, it must be stopped in time. 3. After-class maintenance: To make full use of time, do a good job of cleaning within the scope of all operations.
Regular maintenance: 1. Disassemble the developed parts, cover and protective net, etc., thoroughly clean and wipe the inside and outside of the equipment. 2. Adjust the clearance of each part, tighten the loose parts, check the condition of worn parts and replace the individual wearing parts. 3. Inspect the oil circuit, circuit, and waterway; clean the guide rails and sliding guide rods regularly to remove burrs and scratches.