The Small Hydraulic Block Making Machine is designed as semi-automatic machine with hopper. There is a computer control cabinet in the production. It needs to be wired before production. Let's talk about the wiring process and operation sequence below.
First, The Small Hydraulic Block Making Machine wiring
1. Connect the power cord: connect the power cord to the air switch of the electrical cabinet.
2.wiring: up, down, lift, advance and retreat, limit (from left to right, the mark of the line and the marking of the electrical cabinet is symmetrical) There is wiring video, the machine has been debugged, according to the wiring.
Second, the operation sequence of Small Hydraulic Block Making Machine
1. Press the "Power" button
2. the brick machine pallet
3. press "down" to drop the mold
4. Press “Back” to return the upper mould to the back of the machine.
5. the upper wrench, feeding
6. After adding, press "down"
7. After the vibration, make the material average feed.
8.press "in" into the upper mold, in place,after automatic molding, the lower mold automatically rises, demoulding, the forklift pulls the finished brick with the pallet.If you require more information of our Small Hydraulic Block Making Machine,please email firstname.lastname@example.org