Now we have 2 electric pole production line and 70 sets of various types of molds, with scientific management , and strong technical force, our annual production capacity can reach at 16,000 pcs,The main products are prestressed Φ150×7 meters power poles, Φ150×8 meters power poles, Φ150×10 meters power poles, Φ190×10 meters power poles, Φ190×12 meters power poles, Φ190×15 meters power poles, Φ230×15 Meter poles; reinforced concrete Φ190×10 meters power poles, Φ190×12 meters power poles, Φ190×15 meters power poles, Φ230×15 meters power poles, Φ190×18 meters power poles, and Φ230×18 meters power poles. Satisfy the requirements of high and low voltage lines and 10kv, 15kv, 35kv, 110kv, and substations,all products meet the GB/T19001-2008/IS09001:2008 standard. and also produce other specifications according to user requirements.
1.Aggregate:stones used in the production of cement poles, and stones used in most of the 12# stones must be clean and uniform in size.
2.Sand are the key to the quality assurance of cement poles. It is required that sand can not contain earth and must be clean.
3.The requirements for cement and cement are 4,25 high-strength cement, and the concrete strength is above c50.
4.The strength of steel bars and concrete telephone poles depends on the strength of the steel bars. The national standard steel bar is required to have a strength of more than 1570.
5.The ratio of sand, stone, and cement, according to the standard c50 intensity ratio.
High-pressure steam curing is one of the most commonly used cement curing methods. It accelerates the hardening rate of cement, improves the turnover rate of steel molds, and shortens the production cycle.
Since the size of the international container is generally 11.9 meters, cement rods under 12 meters (for example, 11.65 meters) can be shipped using containers, while cement poles beyond 11.9 meters need to be bulked. Bulk cement rods need to use channel steel or the packaging tape is fixed and then the steel wire rope is used for secondary fixation.