Concrete Block Making Machine with Auto Feeder
Due to the traditional feeding method is difficult to put the material evenly into the mold box, affecting the quality of products. UNIK block making machine adopts forced feeding mothod, through which multiple rows of stirring fork are installed in the mold box, the hopper is sent to the stirring fork at the top of the mold box to force feeding the mold box.
The material of traditional molding machine stored in the hopper. It affected by the aftershock, and some concrete is liquefied in advance, which extend the feeding time, increase the difficulty of feeding, and deviation of product strength is lager. Our brick machine uses a closed belt conveyor, strict control of small hopper storage volume, to achieve materials are available for use.
1. Using PLC intelligent control and random signal and vibration analysis system, with computer interface operation. That can achieve the best performance of machine.
2.Pressure head equipped with a dedicated vibrator to increase the effect of vibration speed. This form of vibration makes concrete quickly liquefied and exhaust to make the product to achieve high density and high strength
3.It has strong exciting force, the amplitude is 2Mm and accelerated speed of excitation is 15g, so that the material quickly formed in about 2 seconds and cement is fully liquefied. In the ordinary weight ratio conditions, brick strength will be increased to a certain extent.
4.The machine body with thick-walled square tube, long guide sleeve to ensure the body is strong and shatter-proof, and head movement is precise.